Wednesday, June 30, 2021

IWISTAO HIFI 12 Inches Bass Speaker Plus Tweeter Horn Empty Cabinet Solid Wood Inverted

IWISTAO HIFI 12 Inches Bass Speaker Plus Tweeter Horn Empty Cabinet  Solid Wood Inverted


This speaker cabinet is 2 ways HIFI empty speaker cabinet, and made of solid wood. The bass is for 12 inches woofer unit, and the tremble is for 1 inch horn tweeter unit and it is made as wooden horn structure. 

The horn is a stable hyperboloid diffusion one, and its horizontal radiation is 90 degrees, and the cutoff frequency is Fc=900hz. It is recommended that the crossover point be about 1.8K HZ.

The adapter of horn has a round-to-square smooth transition. The throat size of the transfer horn is 1 inch (25.4 mm) as default. 

Built-in a invertd structure, it can enhance the low-frequency radiant energy, make low-frequency dive deeper, make the speaker cabinet the full-frequency be more full and rich.

As you know, the greater the material density of the speaker enclosure, the less the vibration produced by the enclosure. Solid wood is more reflective of sound than other materials, and tightness of the wood is higher, and the sound can be effectively expressed by the vibration of the air inside the box. We often say that the sound of wooden speakers is warm, in fact, the word warm means the balance of tri-band that are low, medium and high frequency; if the frequency is too low or too high, it will make people feel uncomfortable. The advantage of wooden speaker is that its playback effect is good, the vibration of the sound inside the box is stable, and the sound effect will be balanced and full.








After fixed the units

Thursday, June 24, 2021

IWISTAO HIFI 2 Way 8 Inch Solid Wood Empty Speaker Cabinet Diamond Cut Corner 26L

IWISTAO HIFI 2 Way 8 Inch Solid Wood Empty Speaker Cabinet  Diamond Cut Corner 26L


This is a pair of 2-way bookshelf solid wood empty speaker cabinet with dovetail structure and diamond cut corner, and its outside is an original wood color plus varnish.

We provide to drill customized holes according to the sizes or drawing of your speaker units.

The accessories include, pure copper terminal x4, guide tube x2, sound absorbing cotton, transparent floor mat, connection wires, and screws And then, you only fix your speaker units with your screwdriver, and use your electric soldering iron to solder the connection wires with your crossovers, and speaker units.

After all, enjoy music after connected with your HIFI audio system also enjoy DIY!


Apply sound absorbing cotton, fix binding post in the back and soldering crossovers.


Fix your speaker units (tweeter and bass)



Connect with your HIFI audio system




The effect of placing at living room


More details, please find here 👇  👇  👇

IWISTAO HIFI 2 Way Bookshelf Solid Wood Empty Speaker Cabinet 6.5/8 Inch 1 Pair Diamond Cut Corner 18 / 26L for Tube Amplifier

There is also 6.5 inches 2 ways speaker below.







Wednesday, June 23, 2021

DIY IWISTAO HIFI 5 Inch Full Range Speaker Unit Labyrinth Cabinet Kit

IWISTAO HIFI 5 Inch Full Range Speaker Unit Labyrinth Cabinet Kit  High-density Fibreboard  DIY


Speaker cabinet adopt double back guide pipe, its return passage measured 1.6 meters, and sound quality is relatively pure. Its panel can be replaced if you have spares. This speaker cabinet kits support 4 / 4.5 /5 inches full range speaker.

Diyer said that it is easy to assemble it, you may fix the boards with screws and nuts after coat glue between the boards, then use a hand saw to saw the ribs, easy to cut when assembled.


After then, fix a pair binding post in the back, at the same time, fix speaker wires well. 


Next step, fix those 2 pcs side boards with glue.



The last step, fix your speaker units, then it is okay, your DIY project is totally completed.



And there is a testing curve below after installing 5 inch full range speaker unit above. The red curve is tested 10cm from the chassis, green line at the listening position.



By the way, there are more empty speaker cabinets here, if you are interested, please take a look the collection.


Wednesday, June 16, 2021

DIY Vacuum Tube Preamplifier with CAT SL-1 Diagram

DIY Vacuum Tube Preamplifier with CAT SL-1 Diagram


Vacuum tube used, 12AU7/1pc, 12AX7/2, 6dj8/1pc



The circuit is large dynamic, accurate in positioning, and mellow in the intermediate frequency. It can be called the most perfect design of the tube pre-amplifier.


More details, please find here,



Tuesday, June 15, 2021

IWISTAO 6.5 Inch Full Range Empty Speaker Cabinet with Labyrinth Structure High-density Fibreboard DIY

 IWISTAO 3-6.5 Inch Full Range Empty Speaker Cabinet with Labyrinth Structure High-density Fibreboard 


Speaker cabinet adopt double back guide pipe, and sound quality is relatively pure. Its panel can be replaced if you have spares. This speaker cabinet kits support 3—6.5 inches full range speaker.

There are two options, one is kits, if you like DIY and have strong practical ability to polish and assemble it, you may try it.





The others one is an assembled as the photos showed below, it is an example for 6.5 inch speaker unit.









More details, please find here,

IWISTAO 3-6.5 Inch Full Range Empty Speaker Cabinet Kits Labyrinth Structure High-density Fibreboard for Tube Amp

 

Friday, June 4, 2021

IWISTAO 2 Way 6.5 Inches Center Speaker Empty Cabinet

IWISTAO 2 Way 6.5 Inches Center Speaker Empty Cabinet 


This is a pair 2-way empty speaker cabinet that is made of 15mm thickness high-density fiber board with PVC wood grain leather on the outside, there are 3 options for wood grain leather.
 

Suitable for one 4-inch tweeter, one 2 pcs 6.5-inch midrange or bass unit.

 



More details, please find here


Wednesday, June 2, 2021

IWISTAO Tube Amplifier Mono-block Integrated West Electric Master 2x8W Vacuum Tube 6F3 Drive 300B 5Z2P Rectifier

IWISTAO Tube Amplifier Mono-block Integrated West Electric Master 2x8W Vacuum Tube 6F3 Drive 300B 5Z2P Rectifier



It is a dream vacuum tube 300B power amplifier with mature circuit design and handmade. Adopting a special high-performance output transformers, will give you a true 300B tone, slender high frequencies (rich triangle iron harmonics), full mid-range maturity, deep dive at low frequencies, and full tension (the tightness of the drum leather can be felt, and low-frequency dark surge) The ranking of the musicians, expression of the singer, and gesture of playing are fully displayed in front of our eyes. This unit also has a secret weapon, put on the tube cover, the sound is arrogant and dynamic, low-frequency control is excellent, bare tube sound is like lingering and soft, the drizzle in the autumn wind.



This unit is driven by an antique famous tube 6F3 (6BM8) composite tube, and its sound is delicate (0.8MA, U: 55 small signal amplifier triode; if 6SN7, requires 3-4ma,U: 13-15), and its dynamic range is large (-11v, u: 10 driver level; if 6sn7, -6v, u: 13), strong driving force (110vpp) is enough to drive the tube 300B (-70v), reduce distortion, and noble sound naturally comes to life!

At the same time, the high-performance packaged output transformer, adopts a complex process and a high-tech design with imports Red Bull Iron Core 86 * 45 from United Kingdom. Selected high-quality enameled wires, CNC drying, vacuum dipping, moisture-proof packaging, and refining Made.

Also it adopts reasonable wiring layout, purely build a shed, reduce the distributed capacitance, and make the high-frequency expansion wider. Reasonable foreign old-fashioned supplementary accessories, and after one year adjusting sound, it is recommended not to modify or upgrade other vacuum tubes. We pursue perfect sound,  this 300B tube amplifier is already tuned to a sound limit level after assembled above accessories , and it conveys the spirit of music and culture.

More details, please find here 🎵🎵🎵🎶🎶🎶