Understanding the Differences Between Speaker Cable, Audio Cable, and Microphone Cable
Published by IWISTAO
When building or upgrading an audio system, choosing the right cables is just as important as selecting the right speakers or amplifier. Each cable type—speaker cable, audio cable, and microphone cable—serves a distinct purpose and is designed with different electrical and structural characteristics. Understanding their differences helps ensure clear, distortion-free, and reliable sound reproduction.
Speaker Cable: Power Transmission for Amplifiers and Speakers
Speaker cables—also known as loudspeaker wire, gold-silver wire (flat cable), or EVJV wire (round cable)—are primarily used to connect amplifiers to speakers. Because they transmit high-power signals, they must offer low resistance and excellent conductivity to minimize signal loss.
Commonly made from oxygen-free copper (OFC), silver-plated, or gold-plated materials, speaker cables provide outstanding electrical performance. Unlike signal cables, they often lack shielding, since the strong power signal is less susceptible to interference.
Specifications
Speaker cables are typically double-core, with common specifications including:
-
Gold-silver wire: 100-core, 200-core, and 300-core (e.g., single-core 200 or double-core 100×2).
-
EVJV wire: 2×1.5mm², 2×2.0mm², 2×2.5mm², or multi-core 4×1.5mm², 4×2.0mm², 4×2.5mm².
More copper strands improve conductivity but increase cost. For home audio, 200–300 strands are usually sufficient.
Because speaker cables handle large current flow, they prioritize low impedance rather than shielding. This makes them ideal for long-distance transmission in home theaters, PA systems, and large venues.
Structure
Speaker cables have positive and negative poles, often color-coded (e.g., red = positive, white/black = negative) or marked along the insulation. They usually have bare wire ends and connect by binding posts, clamps, or screw terminals, rather than pre-molded plugs.
Applications
Speaker cables are essential for connecting amplifiers, receivers, and speakers in:
-
Home theater setups
-
Public address (PA) systems
-
KTV or meeting rooms
-
Cinemas and stage installations
Their role is to deliver high-power energy from the amplifier to the speaker drivers, ensuring dynamic and full-bodied sound.
Advantages
-
Low resistance, high current capacity: Enables efficient power transfer for powerful sound output.
-
Excellent distance performance: Reduces signal attenuation even over longer runs.
-
Simple and durable design: The lack of shielding minimizes mechanical failures and simplifies hidden installation.
-
High current tolerance: Built to handle large electrical loads without overheating or distortion.
Audio Cable: Carrying Low-Power Signal with Precision
Audio cables are designed to transmit low-power, small-current signals between audio devices. Typically composed of conductors, insulation, and outer shielding, they are optimized for signal fidelity and interference resistance, rather than current capacity.
They connect devices like smartphones, televisions, CD players, MP3 players, headphones, and amplifiers. Common connectors include 3.5 mm plugs, RCA connectors, and XLR connectors—each chosen based on the device and signal type.
Specifications
Audio cables come in many configurations:
-
Electrical or optical signal types (optical for digital, electrical for analog).
-
Wire thickness: 0.1 mm², 0.15 mm², 0.3 mm².
-
Shielding density: 96, 112, or 128 mesh—woven or foil-wrapped.
-
Common examples: 3.5 mm male-to-male, male-to-female extension cables, or dual-RCA stereo cables.
Because they transmit delicate voltage-level signals, proper shielding is crucial to minimize electromagnetic interference (EMI). Typical transmission distances are within 50 meters, beyond which signal degradation may occur.
Structure
Audio cables are often pre-terminated with RCA, XLR, or banana plugs. The inner conductor carries the signal, while the shielding serves as the ground and protection against noise. Balanced audio lines (like XLR) use two conductors plus shielding for better noise rejection, while unbalanced lines (like RCA or 3.5 mm) use a single conductor and shield.
Applications
Audio cables are used to interconnect:
-
Music source devices (smartphones, TVs, CD players) to amplifiers
-
Audio interfaces, mixers, or DACs
-
Headphones, speakers, and recording devices
They are ideal for short-distance, low-power transmission, ensuring clear and detailed audio reproduction.
Microphone Cable: Designed for Clarity and Noise Resistance
Microphone cables (or mic cables) connect microphones to amplifiers, mixers, or recording interfaces. They belong to the category of low-voltage control cables, responsible for carrying extremely weak signals—often around 1 mV—without distortion.
These cables must reject interference, especially in environments with lighting, wireless, or AC power sources nearby. High-quality microphone cables achieve this through careful shielding and balanced wiring.
Specifications
The most common type is the RVVP PVC-insulated soft cable, available in 2-core or 3-core versions.
-
Diameter marking: e.g., Φ6.0 mm (overall thickness)
-
Core composition: multiple fine copper strands, such as (28/0.12 mm)×2C, meaning 28 strands of 0.12 mm copper per conductor.
Balanced vs. Unbalanced
-
Balanced cables (e.g., XLR connectors): Use twisted-pair differential transmission to cancel noise, ideal for long distances (up to several hundred meters).
-
Unbalanced cables (e.g., TS connectors): Use single-core plus shield, best for short distances (5–10 m) like home or casual setups.
Structure
Microphone cables combine:
-
High-purity copper conductors
-
One or more shielding layers (braided or foil)
-
Durable connectors (XLR, TRS, TS)
-
Strain-relief and reinforcement layers for stage or studio durability
Applications
-
Professional environments: Stage performances, live sound, recording studios, broadcasting, and engineering installations.
-
Consumer use: Simple recording, podcasting, or karaoke setups using shorter, unbalanced cables.
Key Takeaways: Choosing the Right Cable
| Cable Type | Signal Type | Shielding | Typical Use | Transmission Distance |
|---|---|---|---|---|
| Speaker Cable | High-power electrical | None | Amplifier ↔ Speaker | Long (up to tens of meters) |
| Audio Cable | Low-power signal | Yes | Device ↔ Amplifier / Headphones | ≤ 50 m |
| Microphone Cable | Very low-power signal | Yes (essential) | Mic ↔ Mixer / Interface | Up to several hundred meters (balanced) |
Conclusion
Choosing the right cable is more than a technicality—it’s the foundation of any high-fidelity audio setup.
-
Use speaker cables for delivering amplifier power efficiently to your speakers.
-
Choose audio cables for inter-device signal transmission where clarity and shielding matter most.
-
Opt for microphone cables when handling low-level, high-sensitivity signals that demand strong noise rejection.
Whether you’re setting up a home theater, studio, or professional PA system, selecting the correct cable ensures your system delivers clean, dynamic, and distortion-free sound every time.
