Shigeru Wada Tube Preamplifier Output Quality Sound

Shigeru Wada Tube Preamplifier Output Quality Sound

Tube preamplifier is used as tone processing amplifier between sound sources and power amplifier, so it is so-called, preamplifier output quality sound, power amplifier stage output power, which indicate that a quality preamplifier plays a key role in the entire audio amplifier system. Therefore, it is very important that the sound system choice preamplifier. Tube preamplifier has its special tube soft and warm sound, its listening sense has been ranked the first reputation and praise in all preamplifier, it can be applied to tube power amplifier, transistors one, and active sound system, especially for transistor amplifier, it can make the exists boring, blunt digital taste of your original system becomes rounded, sweet, tube taste is very rich; When listening to human voice, especially for the song folk song female voice, the sound is very warm, very sweet.

Shigeru Wada Tube Preamplifier

I bought CD player that is earlier 16bit models a decade ago, for adding musical charm to the sharp and dry digital sound to improve listening sense, but also because the tube is easier to produce pre-production and high rate of return for many years also try to produce a variety of line sound effects of a variety of tube pre-level, such as Shigeru Wada and Marantz.

The two circuits of preamplifier are more familiar and well-known. Through several repeated proofing tests and contrasts, found Shigeru Wada look is extremely good from performance and sound quality. It is to keep Marantz7 mellow and rich flavor of the characteristics of music, while dynamic, transient, high and low frequency response, analysis of signal-to-noise ratio better than Marantz 7, and Keep pace with each other in the sound field, penetrating sense with Marantz7 . In fact, this is only analysis from Shigeru Wada’s circuit, it is not difficult to find that its preamplifier is made of a very good stability by high-gain double three-tube, composed of two stages voltage amplification, only one tube has 10 times signal amplification capability with a very high sensitivity.

Shigeru Wada Tube Preamplifier with Black Chassis

And its power stage is also known by most of audiophiles, a very superior performance double tube 12AU7 composed of the radio level follower which using SRPP cathode output follower circuit that is similar with SRPP, it is different with the ordinary voltage amplifier stage, it does not have the voltage gain, the role is only current amplification and to reduce the output impedance, so that the load capacity is much larger than the co-screen pole follower, whether in high frequency response or signal to noise ratio. Compared with Marantz 7, it greatly improve low-frequency response, signal-to-noise ratio is also improved in varying degrees, in terms of sound performance is more balanced and comprehensive. So the design of Shigeru Wada preamplifier is very reasonable, both a very high sensitivity, but also a very good carrying capacity, no matter what kind of power stage is more flexible, play most vividly.

Who is familiar with Shigeru Wada are known, characterized by prominent human voice, better midrange. It is appropriate to even harmonic distortion when tube working, which will not worsen listening sense, on the contrary increase the sound of beauty, make the sound be more smooth, some details will be more prominent like to do a certain optimization, especially when playing human voice, there will be some feelings of rich taste out, tube taste is very strong. It will not only play in human voice will give charm, but also playing some pieces of music, such as some indoor recording of the violin, saxophone, jazz and other music, will also have a unique style.

Features

1.       Circuit used Shigeru Wada improved field circuit of the original version; excellent PCB circuit design, reasonable, regular, symmetrical device layout, and strictly follow the rule of single point grounding line.

2.       Whole aluminum chassis especially made for Shigeru Wada with very fine black brushed oxidation, looks shiny, extraordinary taste.

3.       And it used whole aluminum solid sand drying high-end knobs. the plate thickness of body is all 2.8mm, panel thickness is 8mm with high precision milling machine finishing, and tube seats positioning accuracy, holes-cut is smooth and sleek.

4.       Power transformer is up to 120W (EI8642 / H50 film) with a horizontal cover, and the primary and second windings of transformer are shielded strictly. Left and right channel of filament voltage has been supplied by independent winding respectively; completely eliminate mutual crosstalk, good power transformer output good sound.

Product specifications

1.       Input sensitivity : 200mv

2.       Output voltage: 2V (RMS THD <0.03%)

3.       Signal to noise ratio :> 95dB

4.       Frequency response : 10Hz-50KHz (-0.5dB)

5.       Input impedance: 250K ohms

6.       Output impedance: 150Kohm

7.       Input voltage: AC 110V or 220V/50~60Hz

8.       Whole power consumption: < 50W

9.       Dimension(W*D*H) 360mm * 190mm * 140mm

10.   Net Weight: 4.5Kg

11.   Tubes: 12AX7 * 2; 12AU7 * 2 ; 6Z4 * 2.

12.   Accessories:

Power cord x 1

More details, please visit,

Tube Preamplifier Pure with Shigeru Wada Circuit Tube 12AX7 12AU7 6Z4 Rectifier Whole Aluminum Chassis HIFI Audio 110V/220V

An Elegant Desktop Audio Based on LM1875 and PCM2706 (HIFI Amp + labyrinth HIFI speakers Cabinet)

An Elegant Desktop Audio Based on LM1875 and PCM2706 (HIFI Amp + labyrinth HIFI speakers Cabinet)

What is your expected desktop audio? Maybe you could say that it is an HIFI entry level at least, here you are, it might be suitable for if you want to look for an elegant desktop amplifier that based on LM1875 and PCM2706 which can decode the music from your computer or notebook,also include a pair of HIFI speakers which adopt two full-range speaker unit with labyrinth structure.

The Amplifier with DAC function, which is made of LM1875 and DAC used PCM2706, its panel is made of expensive rosewood, and using popular environmentally friendly water-based varnish with manual painted. The color of speaker cabinet is same as its amp panel.

Rosewood Panel

Back view of the amplifier

Rosewood panel

 Full-range speakers with labyrinth structure

Product specifications

HIFI Amplifier DAC

1. Input ports: Mini-USB and RCA x 2
2. DAC: PCM2706
3. Amp IC: LM1875
4. Rated output power:  2 x 10 W
5. Frequency response: 20Hz-20Khz
6. Total Distortion: 0.015% (@ 1 kHz 10W)
7. Output impedance: 4 or 8 Ohm
8. Signal to Noise Ratio: 105 Db
9. Amp Size (L*W*H): 130 mm * 110 mm * 40mm
10. Colors: Black
11. Gross Weight: 1 kg (Including power adapter)
12. Accessories

  USB cable x 1

  RCA cable x 1

  Power adapter (Input: 110-220v, Output: DC 24V/2.5A) X 1

 Speaker connection cable x 2

HIFI 2 Inches Full Rang Labyrinth Structure Speaker

1. Outer power: 2 X 10W

2. Impedance: 4 ohms

3. Speaker unit: 2-inch full-range neodymium speaker unit

4. Sensitivity: 84dB

5. Cabinet material: Wooden

6. Interface Type: RCA inputs

7. Weight: 1.6KG / pair

8. Dimension: 165mm X 72mm X 126mm

Package

Packing list

Applications

More details, please find http://www.aliexpress.com/store/product/2-Inch-Full-Range-Labyrinth-Speakers-HiFi-LM1875-Amplifier-PCM2706-DAC-Decoding-Valued-Packs-HIFI-Stereo/725205_32375082932.html

Natual and warm sound from Tube Headphone Amplifier by Model WEVT-PAN13P

Natual and warm sound from Tube Headphone Amplifier by Model WEVT-PAN13P

The circuit of tube headphone amplifier is mature and easy to find, which has developed since the last century. If searched as search engine, you will find many similar circuits, which is the network brings convenience. But not to adopt a same circuit, you can make of the same good sound, which is known by audiophiles. Especially tube amplifier, their sound qualities depend on parts and component selection, and tuning. If tuning tube amp is errors, it led to ordinary sound that may be worse than transistor amplifier; in addition, tube filament shall be powered by AC. So, this is why pure tube amplifier can provide you tube taste sound.

This tube headphone amplifier brings you is no exception, 6N11 plus 6N13P is a classic circuit that is also known as "black voice". In addition, we do some intimate unique designs for subsidiary circuit, its main circuit follows classic "black voice" one. But when you see this amplifier a while, it will make you a fresh feeling, right?

Natual and warm sound from Tube Headphone Amplifier by Model WEVT-PAN13P

Classic Tube Headphone Amp

There are some features as below

1.    Beautiful quaint European appearance will make you be fond of and unwilling to part. The unit adopts a sub-structure, small size (for tube amp is concerned), it is a desktop tube amp, which brings the dual auditory and visual enjoyment.

2.    Furthermore it is adopt a separate power supply, 50W power transformer with special plastic power box, super-soft bold power cable; POWER provide a more robust energy and the interference to a minimum.

3.    The unit filament keeps AC power supply, which allows you to hear tube taste. And it is excellent performance that strong experiences and solid circuit design skill ensure, and there is hardly AC background noise

4.    With a VU meter level display, and use high-quality Taiwan meter header.

5.    Used HIFI material, red Weimaraner audio-specific capacitors, electrolytic import, ALPS 27 type double-volume potentiometer, USA RCA Cinch.

6.    Another trick is that this unit is equipped with a low-voltage startup device, through internal relay to control high-current high-voltage access; it can be described as distinctive design.

7.    It is worth mentioning that, in addition to the amp features, it is a decent quality tube pre-amplifier, because there is 6.35 headphone output (PO) port, also with two RCA Cinch line output (LO ) port. 

Diagram of Connection With Devices

Power Adaptor

Applications and Modification by Audiophiles

Also, it had gotten high recommended by customers.

More details, please visit the link below

http://www.aliexpress.com/store/product/Tube-Headphone-Amplifier-6N11-Pure-Class-A-Preamplifier-Voltage-Amplification-6N5P-Power-Stage-Amp-20-200mW/725205_2054102378.html

Flagship Headphone Amplifier HIFI Full DC Amp Class A KSA5 Circuit Power Amplifier 8W Output Discrete Component

This headphone amplifier is much layered and extensions, that can realism distinctly and fresh feeling for every note, details, and layer. Its THD + N (THD + Noise) only is 0.00607% @ 1KHz & 300ohm load

Its design is based on KRELL headphone amplifier ksa5 circuit, which should be the most powerful amp circuit for driving force currently. With a gold seal input FET, and output stage used two pairs of ON transistors king NJW15034.15032 (or 15,032.33) with 8A output current per channel, that guaranteed enough low output resistance. Effectively to drive transistor used four small power one in parallel, its benefits are more detailed and better overtone. You can drive those flagship headphones like as HD800 HD650 Q701, and so on. And as a Class A amplifier to use, it has a strong driving force, there are four speaker terminals installed on the back panel, enough to push desktop speakers.

The whole material used are extremely well, everything prepared for the flagship headphones!

What Is a Phono Stage Amplifier?

WhatIs a Phono Stage Amplifier?

Playing vinyl records isn't as easy as it was back in the day, while MP3 and CD formats dominate the current audio marketplace; vinyl records remain popular among collectors. Many claim that vinyl sounds better than digital formats, while others simply own records that they still enjoy. Many of today's lower priced stereo receivers are not adequately equipped to power a turntable. Because modern electronic technology is different from the technology used to create vinyl records, a phono pre-amplifier is required to enjoy them.

To add a turntable to such an audio system, a user must use a specially-designed phonograph preamp also known as a phono stage. For those with vintage vinyl collections a turntable, a phono pre-amplifier and a receiver are required to fill a room with the sounds of record albums.

The magnetic cartridge in a turntable has a lower output than that of line level audio sources like CDs and tapes. A phono preamplifier boosts the volume from a turntable to equal the line audio. Older systems usually have a phono preamp built-in, but many newer units require users to purchase one separately.

To reduce background noise and sibilance, LPs have an equalization curve that boosts higher frequencies. Reversing this equalization, known as the "RIAA curve," returns the music to its original frequency. Unlike other preamps, which amplify this sound, a phono preamp will nullify it. Good-quality phono preamplifiers have a high signal-to-noise ratio, and will correctly adjust RIAA equalization.

But it may be difficult that how to connect a Phono Stage Preamp to a Turntable for the newers, there some steps as below.

1.    Locate the left and right stereo output jacks on your turntable. Also locate the stereo input jacks on your phono stage preamp.

2.    Place the turntable and phono stage preamp where they will be when in use. Ensure that the turntable is located on a level surface. Avoid placing the turntable on top of speakers or anything that may generate heat.

3.    Use the measuring tape or ruler to determine the distance between the output jacks of the turntable and the input jacks of the phono stage.

4.    Ensure that your stereo interconnect cables is at least as long as the distance measured in step three. If you do not already have the interconnect cable, choose one that is long enough to span this distance without strain. If you will need to pull either the turntable or preamp out of its location in order to access its connectors, choose a cable long enough to allow for movement of the components.

5.    If there is a Turntables ground, it will be connected with phono amplifier ground interfaces, just very simple.

6.    Power up your receiver, turntable, and phonograph stage. Select the appropriate audio source on your receiver, drop the needle to your record on the turntable, and enjoy the music.

There is two phono amplifier as link shown, more details, please click them.

HIFI MM Phono Stage Amplifier for Electric Gramophone with Ceramic Package AD847AQ plus AD712JN Attenuated RIAA Circuit

HIFI MM Phono Stage Tube Amplifier for Electric Gramophone with 2x12AX7 RIAA 2 Negative Electrode Feedback Dedicated (MKP) Black