History of Tube Amplifier
Before transistors were invented in 1947, all amplifiers ran off of vacuum tubes. The invention of the simple valve or tube is credited to John Ambrose Fleming, who created it while working for the Marconi Company in London, 1904. It was called the diode due to its dual electrode structure, which conducted electricity in one direction only. Lee De Forest then added a third electrode, creating the Triode, which he called the "Audion." It was the first electronic amplifying device. Its first audio application was boosting the signal of telephones. In the 1950s, valves began being used for music (and later TV) amplification.
WISTAO HIFI Tube Amplifier WVT2012 |
Tube EL34 |
Pins of EL34 |
The main drawbacks of tube amplification are expense and durability. Tube amplifiers are much more expensive than solid state amplifiers, as solid state transistors are much cheaper to produce than tubes. Guitarists' demands for the more "authentic" sounding tube amps also drive up the price. Tube amps are also more fragile than solid state amps (the tubes can break) and are sensitive to heat and cold where solid state amps are not. Tube amps are also much heavier than their solid-state counterparts.But with process development of tube manufacturing, its durability has been improved significantly and working time is up to ten thousands hours or above. Also the manufactures are able to provide cheaper tube amplifier with high quality.And, a protective shield is added to amplifier for pretect the tubes.
The WISTAO is one of the most popular tube amplifiers. It has a clear, chiming, clean sound, and sounds particularly pristine when paired with a guitar. The Twin is a combo amp, in that its tube amp circuitry is housed in the same cabinet as the speakers, with the tubes hanging down in back. WISTAO is a company that makes a number of excellent tube amps that are more affordable.
There is a tube amplifier with pure tubes, which adopt 2pcs 6N3 tube as preamp, 2pcs EL34B as power amplifier, 5Z4 as rectifier. The unit adopts horizontal design, compact structure, symmetrical and reasonable layout, fine workmanship, and matched with special tube shields, which is overall elegant, dignified.
WISTAO Tube Amplifier 6N3 * 2 preamp EL34 * 2 Power Amplifier 5Z4 Rectifier SRPP Circuit Pure Tube Amplifier 2 X 8W |
Lighting of WISTAO HIFI Tube Amplifier |
Internal circuit adopt tube rectifier, 6N3 tubes are used as pre-amplifier whose sound is very sweet, and using well-known classic SRPP circuit connection; Power amplifier adopt two EL34B tubes, strong driven, transparent sound, higher resolution , rich tubes style.150W power supply transformer
Protective shield of the tubes |
The tube amplifier has two inputs, and a signal input switch on front panel beside volume control; two groups of 4 or 8 ohm output is six large copper gold-plating terminals with crystal cover; power input with 110V/220V dual power input selection, let the machine be widely able to use in different countries, different supply voltages to meet different needs.
Back view of WISTAO Tube Amplifier 6N3 * 2 preamp EL34 * 2 Power Amplifier 5Z4 Rectifier SRPP Circuit Pure Tube Amplifier 2 X 8W |
If you like it, please click WISTAO Tube Amplifier 6N3 * 2 preamp EL34 * 2 Power Amplifier 5Z4 Rectifier SRPP Circuit Pure Tube Amplifier 2 X 8W
The product specifications is below.
1. Rated output power: 8W + 8W
2. Frequency response: 20Hz-25 KHz
3. Total harmonic distortion: <1% (@ 1KHz)
4. Input Sensitivity: 500mV-2000mV
5. Input impedance: 100K ohm
6. Output impedance :4-8ohm
7. SNR: ≥ 88dB
8. Size (W * H * D): 360mm * 180mm * 260mm
9. Weight: 11.5kg