IWISTAO HIFI 3 Inch Full Range Speaker Finished 1 Pair Solid Wood Labyrinth Structure

IWISTAO HIFI 3 Inch Full Range Speaker Finished 1 Pair Solid Wood Labyrinth Structure for Tube Amp

This speaker cabinet is made of solid wood. Built-in a labyrinth structure, it can enhance the low-frequency radiant energy, make low-frequency dive deeper, effectively overcoming insufficient bass of commend full range speaker cabinet, make the speaker cabinet the full-frequency be more full and rich.

Its magnetic circuit system adopts the neodymium iron boron rare earth strong magnetic structure plus short circuit copper bushing, which improves its performance of music details from starting point. The choice of the cone is more exhaustive, when it is determined to use aluminum as its sound basin, it begins to this thin aluminum material has been studied in various ways. If it is thicker, its rigidity will be better, but its resolution is poorer, in contrast if it is thinner, the resolution is better, but its rigidity will be poorer. Finally, it was decided to use a thin aluminum to improve the rigidity from the shape and depth anodizing treatment. The aluminum treated in this process is almost the same as ceramic. So, the sound quality is also going to a new level, whether it is bandwidth, details and transients have an ideal performance!

IWISTAO Discrete Components Stereo FM Radio Board Electrical Tuning

IWISTAO Discrete Components Stereo FM Radio Board Electrical Tuning Decoding LA3401 TDA2030A Amplifier

(power supplied by battery)

This is a stereo FM radio finished board with discrete components. You only connect DC12V power adapter and speakers then you can enjoy wonderful FM radio. Or, you may make a wooden casing and DIY it as a vintage radio.

  

The FET is used for high-level discharge, and the triple-coupling is used to increase the AFC automatic frequency tracking circuit, which makes the receiving sensitivity more selective and increases the frequency display. The debugging is more intuitive.

The PCBA adopts double balanced proportional discriminator with excellent sound quality, and also optimizes its layout of the intermediate frequency circuit PCB, improves the stability of the intermediate frequency. And it uses a LA3401 decoding chip as FM stereo decoder, whose resolution is up to 70dB,its noise ratio is up to 95 dB. At the same time, a first-stage FM mixed signal preamplifier is added, which improve the problem that the LA3401 standard circuit cannot be driven in weak signal, so that each radio station can achieve good mediation resolution. After then, the LA3401 has no decoding noise and is comparable to the LA3450 chip.

The power amplifier part use two TDA2030A chips, its output power is larger, sound quality is pure and thick, clean and pure.

This is a PCBA bord, and you should connect a quality power supply as DC12V , don't use a switch power supply that interfere the radio signal receiving , you may use common linear power from power transformer. It is best if you can provide power form battery，please try it if available.

More details, please find https://www.iwistao.com/collections/tube-fm-radio-tuner/products/iwistao-discrete-components-stereo-fm-radio-board-electrical-tuning-decoding-tda2030a-amplifier