Create beautiful sound from preamplifier and output strong power by power stage
Tube 6N3 is a medium u double triode, which
is thick tube taste, and use to make tube preamplifier or tube headphone
amplifier. Its performance parameters are same as the United States 5670,
Russia 6H3, do it can be replaced by them directly.
Tube 6N3 is indirectly heated oxide cathode
twin triode type, mainly used for high-frequency voltage amplification. Its
internal structure is fully symmetrical, which makes 6N3 has excellent
high-frequency characteristics, and sound localization. There was a shield,
which makes 6N3 has a high Signal to Noise Ratio, which is very important in tube
preamplifier designing. If you want to make a tube preamp, AC noise is loud, even
its sound good, always fly in the ointment. But 6N3 has shielding layer, let the
murmurs can’t be hardly heard when you touch your ear to speaker. As its distortion
is even-order distortion, it let the sound of 6N3 is more comfortable when you listen
music for a long time. At the same time, it can significantly improve
distortion that the output of 6N3 adopts current feedback, let its sound be high-fidelity,
and taste particularly strong tubes, musical and strong infection.
On the other way, TDA1521 is low distortion
and high stability chip by Philips designed. The power output of TDA1521 is 2 x
15W at AC ± 16V voltage, impedance 8Ω, its Input impedance is 20KΩ, input
sensitivity is 600mV, SNR is up to 85dB. Also, the circuit set up functions of waiting,
muted, overheating protection, low offset voltage, high ripple rejection and
low thermal resistance, excellent resolving power of high frequency and low
intensity. Its pure transparent sound, intensity White chunky bass, treble
clear and bright, very tube charm.
Therefore, this hybrid tube amplifier is 6N3
as a preamp, TDA1521 as a power amplifier; so that the two parts complement
each other, exert hybrid tube amplifier characteristics, namely to create
beautiful sound from preamplifier and output strong power by power stage.
Further, that is, the preamp section of power
amplifier to use tubes amplify sound signal, enabling the input audio signal
has a good sound performance as bright treble sound, full midrange, mellow and
elastic bass, relatively "warm" sound and high dynamic range, with
sound natural, lifelike characteristics, while overcoming tube amp music
playback seem stiff enough with compared to transistor amplifier; the power amplification
section to use transistor or power amplifier IC amplify the sound signal then output
to ensure the speed and power to overcome pure tube amp sound "sense of
speed" is not strong when playing fast-paced music does not make satisfied
people's weaknesses.
The hybrid tube amplifier has three kind of
signal inputs, CD , Aux and support U disk, SD card that support MP3 / WMA format
files playback. You can connect the amplifier with PC or notebook, smartphone to
play lossless format music like as WAV, FLAC,APE that played by music player through
aux input as a desktop audio or PCHIFI amplifier, it will give hifi music enjoin and excellent experiences.
Workmanship and choice of materials are
very cautious, used a double-sided fiberglass PCB, low loss transformers,
excellent vacuum tube and full brushed aluminum casing. Sound authentic, no
deliberate modification, nor omission, is a good partner of full-range speaker.
HIFI Desktop Amplifier -- IWISTAO Tube Amplifier Hybrid HIFI 6N3 Preamplifier |
3 kinds signal inputs -- IWISTAO Tube Amplifier Hybrid HIFI 6N3 Preamplifier |
Support U disk & SD card -- IWISTAO Tube Amplifier Hybrid HIFI 6N3 Preamplifier |
More detail, please visit IWISTAO Tube Amplifier HIFI Hybrid 2 x 15W
You have shared a lot of information in this article about sound rentals. I would like to express my gratitude to everyone who contributed to this useful article. Keep posting.
ReplyDelete