IWISTAO HIFI 3 Inch Full Range Speaker Finished 1 Pair Solid Wood Labyrinth Structure

IWISTAO HIFI 3 Inch Full Range Speaker Finished 1 Pair Solid Wood Labyrinth Structure for Tube Amp

This speaker cabinet is made of solid wood. Built-in a labyrinth structure, it can enhance the low-frequency radiant energy, make low-frequency dive deeper, effectively overcoming insufficient bass of commend full range speaker cabinet, make the speaker cabinet the full-frequency be more full and rich.

Its magnetic circuit system adopts the neodymium iron boron rare earth strong magnetic structure plus short circuit copper bushing, which improves its performance of music details from starting point. The choice of the cone is more exhaustive, when it is determined to use aluminum as its sound basin, it begins to this thin aluminum material has been studied in various ways. If it is thicker, its rigidity will be better, but its resolution is poorer, in contrast if it is thinner, the resolution is better, but its rigidity will be poorer. Finally, it was decided to use a thin aluminum to improve the rigidity from the shape and depth anodizing treatment. The aluminum treated in this process is almost the same as ceramic. So, the sound quality is also going to a new level, whether it is bandwidth, details and transients have an ideal performance!

IWISTAO Discrete Components Stereo FM Radio Board Electrical Tuning

IWISTAO Discrete Components Stereo FM Radio Board Electrical Tuning Decoding LA3401 TDA2030A Amplifier

(power supplied by battery)

This is a stereo FM radio finished board with discrete components. You only connect DC12V power adapter and speakers then you can enjoy wonderful FM radio. Or, you may make a wooden casing and DIY it as a vintage radio.

  

The FET is used for high-level discharge, and the triple-coupling is used to increase the AFC automatic frequency tracking circuit, which makes the receiving sensitivity more selective and increases the frequency display. The debugging is more intuitive.

The PCBA adopts double balanced proportional discriminator with excellent sound quality, and also optimizes its layout of the intermediate frequency circuit PCB, improves the stability of the intermediate frequency. And it uses a LA3401 decoding chip as FM stereo decoder, whose resolution is up to 70dB,its noise ratio is up to 95 dB. At the same time, a first-stage FM mixed signal preamplifier is added, which improve the problem that the LA3401 standard circuit cannot be driven in weak signal, so that each radio station can achieve good mediation resolution. After then, the LA3401 has no decoding noise and is comparable to the LA3450 chip.

The power amplifier part use two TDA2030A chips, its output power is larger, sound quality is pure and thick, clean and pure.

This is a PCBA bord, and you should connect a quality power supply as DC12V , don't use a switch power supply that interfere the radio signal receiving , you may use common linear power from power transformer. It is best if you can provide power form battery，please try it if available.

More details, please find https://www.iwistao.com/collections/tube-fm-radio-tuner/products/iwistao-discrete-components-stereo-fm-radio-board-electrical-tuning-decoding-tda2030a-amplifier

IWISTAO HIFI Full Range Speaker Aluminum Casing 2x25W NdFeB Magnetic 8 ohm 78Hz-19.8Khz

IWISTAO HIFI Full Range Speaker Aluminum Casing 2x25W NdFeB Magnetic 8 ohm 78Hz-19.8Khz

This speaker is a whole aluminum casing, with ultra-thick materials, precision CNC machining, and install a special developed 4-inch full-range speakers, low frequency is better than the same diameter (4 inch) speakers. The use of aluminum alloy cabinet has many advantages, that is, it will not peel off, aging, cracks, etc. unless it falls on the ground, and the life is almost unlimited. And its density is heavier than the wooden speaker, there will be better shock absorption effect and with the internal sound-absorbing cotton, and the low frequency will not diverge.


The speaker uses a 4-inch NdFeB strong magnetic unit. Its low-frequency density is very good, dynamically distinct, the high-frequency extension and air feel are better, and the human voice is sweeter. This uit, first of all, is a magnetic circuit system, tombarthite NdFeB magnetic structure plus a short-circuiting copper sleeve, which solves the thoroughness of medium-high frequency from the starting point. But the selection of cone is more painstaking, cone is mainly composed of bass and medium-high sound. After various screenings, cotton and linen fiber is selected finally. And, the treble must be rigid and soft, then the bamboo plus bark fiber is selected. Through countless trials and adjustments, the effect finally conquered out ears. The final results are that its medium-high frequency density is very good, very thorough, and the background is clean.

More details, please find https://www.iwistao.com/collections/hifi-speakers/products/iwistao-hifi-full-range-speaker-cabinet-with-whole-aluminum-casing-2x25w-ndfeb-strong-magnetic-unit-8-ohm-78hz-19-8khz-black-w?variant=18563421438067

DIY 300B Vacuum Tube Amplifier with IWISTAO Amorphous 8C Core Output Transformer

DIY 300B Vacuum Tube Amplifier with IWISTAO Amorphous 8C Core Output Transformer

There is a video that is 300B Vacuum Tube Amplifier, which is used IWISTAO Amorphous 8C Core Output Transformer.

You may find IWISTAO Amorphous 8C Core Output Transformer here for more details.

https://www.iwistao.com/collections/output-transformers/products/300b-output-transformer-c-type-single-ended-british-amorphous-8c-advanced-core-pr-3-5k-se-0-4-8-ohms-for-vacuum-tube-300b

IWISTAO HIFI Labyrinth 4.5 Inch Full Range Empty Speaker Cabinet Solid Wood 15mm Thickness Board

IWISTAO HIFI Labyrinth 4.5 Inch Full Range Empty Speaker Cabinet Solid Wood 15mm Thickness Board

This is a labyrinth empty enclosure that is made of poplar plywood or solid wood, the veneer of poplar plywood has natural tree branches texture and wood knots and has a natural beauty,

As you know, the greater the material density of the speaker enclosure, the less the vibration produced by the enclosure. Solid wood is more reflective of sound than other materials, and tightness of the wood is higher, and the sound can be effectively expressed by the vibration of the air inside the box. We often say that the sound of wooden speakers is warm, in fact, the word warm means the balance of tri-band that are low, medium and high frequency; if the frequency is too low or too high, it will make people feel uncomfortable. The advantage of wooden speaker is that its playback effect is good, the vibration of the sound inside the box is stable, and the sound effect will be balanced and full.

More details, please find here https://www.iwistao.com/collections/empty-woodem-cabinets/products/iwistao-hifi-labyrinth-4-5-inch-full-range-empty-speaker-cabinet-solid-wood-poplar-plywood-thickness-board?variant=18653759668339