Little 7 pcs Vacuum Tube MW/SW Radio 3 Bands AM 535-1605 KHZ Shortwave 2.3-7 MHZ 6-18 MHZ

Little 7 pcs Vacuum Tube MW/SW Radio 3 Bands AM 535-1605 KHZ Shortwave 2.3-7 MHZ 6-18 MHZ 

This is a pure tube 3-band radio, it can receive a medium wave and two band shortwave signal. Tube radio is built in 4-inch small speakers, which can meet listening need for 15 square rooms. If you connect an external 6-8 inch full-range speaker, then there will be a leap in sound volume.

Nobody but you from IWISTAO HIFI 4 Inch Full Range Labyrinth Speaker

Nobody but you from IWISTAO HIFI 4 Inch Full Range Labyrinth Speaker

Nobody but you, the song is from IWISTAO HIFI 4 Inch Full Range Labyrinth Speaker plus single-ended class A 6P1 vacuum tube amplifier. The music source of notebook is connected with a CSR64251 Bluetooth decoder via Bluetooth wireless connection, and music player is foobar2000.  And the video is taken by smartphone.

The speaker cabinet is made of solid wood, and built in labyrinth structure that adopts double back guide pipe to effectively prevent the sound waves from forming standing waves, and sound quality is relatively pure. Also, its speaker unit is a full range one, is made of double 80mm magnet, tarpaulin edge, composite cone, aluminum alloy frame and 25mm coil, which is used in model AP5001 that this monitor speaker cabinet is designed by Japanese designer Mr. Kameyama presided over the design with AS100FL 42Ex speaker unit. After launched in Japanese market, AP5001 achieved very good response, and it was elected as monitor speaker cabinet by Japan's Fuji TV station. The sound is very accurate, full-range balanced, low distortion. This is from her exquisite workmanship can be realized, a large magnet, large elastic wave, long stroke, composite cone, aluminum alloy frames, that is carefully designed products when a glance.

More details, please find here,

IWISTAO HIFI 4 Inch Full Range Labyrinth Speaker 2x60W 4Ohms 92dB Max AKISUI4 Oak for Tube Amp

Advantages of O Type Power Transformer

 Advantages of O Type Power Transformer

Generally, the sound of toroidal transformer is good, large dynamic, less magnetic leakage, more quiet, and low temperature. R type transformer’s voice is warm, low internal resistance, excellent high frequency extension and also the subtle state is very good.

O-type transformer, combined with the advantages of R-type transformer and toroidal one. A completely non-cutting core made of high-flux silicon steel strip, O type transformer is made of this round-section iron core has a small volume and good electrical performance, and is an ideal transformer. The O-shaped and the ring-shaped transformer are completely different. The ring-shaped transformer is made of steel strips. The O type transfomer is a one-piece iron core. In terms of efficiency and magnetic flux leakage, the O-type has an inherent advantage. As actual listening, its performance is very accurate in high frequency characteristics, transient, and detailed.

Compared with toroidal transformer, O type transformer has the following advantages:
a. The average length of the coil is reduced by 11.4%-30%;
b. The coil has no folding angle, which makes the magnetic field distribution more uniform. For Structural features, the core has no fracture, the section is approximately circular and like as an oblate structure, also its height is short and diameter is larger with more uniform structure, so that its leakage magnetic is smaller.

Compared with the R-type transformer, its coil is not limited by the skeleton, and is tightly attached to the core, which is better coupled and more efficient. O-type transformer’s sound quality at sweet and warm aspect has a significant difference in actual comparison with the other transformers.

What is B, P, and G for tube amplifier output transformer?

We had been asked the questions that what B, P, and G for tube amplifier output transformer is. Maybe it is a simple question for tube amplifier audiophiles, there a brief for it below.

The primary of tube amplifier output transformer generally has two, three and five connection terminals.

The circuits of single tube type class A amplifier Among them include:

1. The primary is 2 connection terminals, P is connected to the screen, B is connected to B+ (that is, DC high voltage power supply)
2. The primary is 3 connection terminals, P is connected to the screen, G is a Ultra-linear tap (connected to the second gate of the power amplified tube such as 6P6P, 6P1, 6P14, etc.), B is connected to B+ (that is, DC high-voltage power supply)

 

Push-pull circuit:

1. The primary is 3 connection terminals, the transformer primary has two P terminals, and one B terminal, two P terminals respectively is connected to the screen of tube No and No2, B then connected to B + (that is, high-voltage DC power supply).Here, tube No.1 and No. 2 are two push-pull arms, same as below.
2. The primary five connection terminals, the five primary connection terminals of output transformer are: P1, G1, B, G2, and P2. Among them, P1 is connected to the screen of tube No. 1, G1 is connected to the ultra-linear tap of tube No. 1, P2 is connected to the screen of tube No. 2, G2 is connected to the ultra-linear tap of tube No. 2, B is connected to B+ (that is, DC high voltage power supply). There is an example below for push-pull circuit.

 

IWISTAO HIFI MINI Tube Hybrid Amplifier Bluetooth 4.0 2x28W Output 6N1 Preamp APT-X Black

 IWISTAO HIFI MINI Tube Hybrid Amplifier Bluetooth 4.0 2x28W Output 6N1 Preamp APT-X  Black

This is a mini tube hybrid amplifier, and support Bluetooth 4.0, apt-x, also it has 2 groups RCA inputs. Here, it play music from CD player, there is a demo below.

IWISTAO HIFI MINI Tube Hybrid Amplifier Bluetooth 4.0 2x28W Output 6N1 Preamp APT-X 115/230V Black from IWISTAO HIFI MINIMART1 on Vimeo.

You can use it to play lossless music formats music or network streaming with music player which is compatible with APE or FLCA music format , to enjoy funs of HIFI music. We recognize it is a better companion of your smart phone, tablet PCs and other mobile devices to enjoy wireless fidelity music.

（It played under Bluetooth wireless connection）

   

It is Hybrid designs that Wistao Bluetooth music base station, its preamp adopt 6N1 dual triode tube, power amplifier using high-power integrated IC. This design combines mellow and beautiful sound of tubes with feature of high-power output of high-power integrated IC, its maximum power is up to 2 x 28W, enough to meet your listening needs.


Also simple design of two switches, one is Bluetooth input switch, the other is RCA input of CD signal. It’s up to you to choose using Bluetooth signal input or RCA line input. The right of volume knob allows you to adjust volume of speakers. The rear of Bluetooth music base station is equipped with a banana plug line input, and can switch freely according to your needs, to switch CD input mode.

More details, please find below

IWISTAO HIFI MINI Tube Hybrid Amplifier Bluetooth 4.0 2x28W Output 6N1 Preamp APT-X 230V Black